Parking brake – CHEVROLET Tahoe User Manual

Page 156

Advertising
background image

Parking Brake

To set the parking brake, hold the regular brake
pedal down with your right foot. Push down
the parking brake pedal with your left foot.

A chime will activate and the warning light will
flash when the parking brake is applied and
the vehicle is moving at least 5 mph (8 km/h).

To release the parking brake, hold the regular brake
pedal down. Pull the bottom edge of the lever,
located above the parking brake pedal, with the
parking brake symbol, to release the parking brake.

If the ignition is on when the parking brake is
released, the brake system warning light will
go off.

Notice: Driving with the parking brake on can
overheat the brake system and cause
premature wear or damage to brake system
parts. Verify that the parking brake is fully
released and the brake warning light is
off before driving.

If you are towing a trailer and are parking on any
hill, see Towing a Trailer on page 422.

156

Advertising
This manual is related to the following products: