Yamaha MT100 - Manual (Page 22)

SPECIFICATIONS
TAPE TRANSPORT
Tape Type
Heads
Tape Speed
Pitch Control
Wow & Flutter
Rewind Time
Motor
Chrome (70 mIcrosec. EQ)
4-channel Permalloy rec/play head
4-channel ferrite erase head
4.75 cm/sec., 9.5 cm/sec.
± 10 %
Less than 0.05% WRMS
Approx. 100 sec., for C-60 tape
DC servo motors (2)
CONNECTORS
Input 1 & 2 Input Impedance 10 k-ohms
Rated Input Level -10 dB to -50 dB (fader nominal)
Max. Input Level + 10 dB (gain control min.)
Min. Input Level -56 dB (gain control,, fader max.)
Input 3 & 4 Input Impedance 10 k-ohms
Rated Input Level -10 dB (fader nominal)
Min. Input Level -16 dB (fader max.)
Aux Return Input Impedance 10 k-ohms
Rated Input Level -10 dB (fader nominal)
Min. Input Level -16 dB (fader max.)
Stereo L & R Output Impedance 1 k-ohm
Load Impedance Greater than 10 k-ohms
Rated Output Level -10 dB into 50 k-ohms
Phones Out Load Impedance 8 to 40 ohms
Max. Output Level 100 mW + 100 mW/40 ohms
Tape Out 1 to 4 Output Impedance 1 k-ohm
Load Impedance Greater than 10 k-ohms
Rated Output Level -20 dB into 50 k-ohms
Aux Send Output Impedance 1 k-ohm
Load Impedance Greater than 10 k-ohms
Rated Output Level -10 dB into 50 k-ohms
ELECTRICAL SPECIFICATIONS
Frequency Response
S/N ratio
Distortion
Channel Separation
Erasure Ratip
Noise Reduction
40 Hz to 18 kHz, ± 3 dB at 9.5 cm/sec.
40 Hz to 12.5 kHz, ±3 dB at 4.75 cm/sec.
85 dB, dbx ON, IHF-A
Less than 1%, 315 Hz
Greater than 55 dB at 1 kHz
Greater than 70 dB at 1 kHz
dbx *
GENERAL
Power Requirements
(PA-100 AC Adapter)
Dimensions (WxHxD)
Weight U.S. & Canadian Models: 120 V AC, 60 Hz
General Model: 220/240 VAC, 50/60 Hz
382 X 65 X 205 mm (15" x 2-1/2” x 8")
2.5 kg (5.5 lbs)
'
dbx is a trademark of dbx Incorporated.
OdB = 0.775 Vr.m.s.
All specifications subject to change without notice.
20
MTIOO MULTTTRACK CASSETTE RECORDER