Cinema-dsp programs, For movie programs: no. 7 to 9, Table of program names for each input format – Yamaha HTR-5540 User Manual

Page 36: Notes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CINEMA-DSP

CINEMA-DSP programs

■ For movie programs: No. 7 to 9

This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.

Table of Program Names for Each Input Format

N. Input

2 channel

5.1 channel

6.1 channel *

No.

Program

Stereo

DOLBY DIGITAL

DTS

DOLBY DIGITAL

Matrix 6.1

DTS

Matrix 6.1

7

MOVIE

THEATER 1

70 mm spectacle

DGTL Spectacle

DTS Spectacle

Spectacle 6.1

Spectacle 6.1

70 mm Sci-Fi

DGTL Sci-Fi

DTS Sci-Fi

Sci-Fi 6.1

Sci-Fi 6.1

8

MOVIE

THEATER 2

70 mm Adventure

DGTL Adventure

DTS Adventure

Adventure 6.1

Adventure 6.1

70 mm General

DGTL General

DTS General

General 6.1

General 6.1

9

DOLBY
DIGITAL

Normal

Matrix 6.1

Enhanced

Enhanced 6.1

DTS DIGITAL

SUR

Normal

Matrix 6.1

Enhanced

Enhanced 6.1

PRO LOGIC

Normal

Enhanced

PRO LOGIC

n

Movie

Music

^ means the Matrix 6.1 decoder is ON.

\i/

• If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will automatically switch to

the Dolby Digital playback sound field or DTS playback sound field.

• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the MATRIX 6.1 button

on the remote control, the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder usually turns on and the corresponding DSP

program is selected.

• MATRIX 6.1 on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the virtual rear center

speaker. In this case the program name changes to the corresponding name for 6.1 channel.

• When playing a 6.1 channel source with MATRIX 6.1 on the remote control turned off, the program name changes to the

corresponding name for 5.1 channel.

Notes

'

The “ i DSP ] ” indicator does not light up when selecting program No. 9 except in Enhanced mode.

’ When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, main and rear

speakers output effect sounds.

32

Advertising