Ratings [dvd-v, Setting method, El press enter – Yamaha DVD-C920 User Manual
Page 32: To change settings, Pcm down conversion [dvd-a] [dvd-v, Speaker settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETUP MENU
Ratings [DVD-V]
Depending on software capability, you can prevent discs or scenes with objection
able material from being played according to your desired rating. You can select
the level and lock it by designating password.
Level 8
All DVDs can be played.
Level 7 to 1
Level of restriction becomes severer as the
number gets smaller.
Level 0
All DVDs cannot be played.
■ Setting m ethod
11
Follow steps 1 to 4 of ‘Operating the Setup Menu’ (see p.25) to
select the desired level.
H Enter 4-digit number with numeric buttons and press ENTER.
• Press CANCEL if you want to re-enter other number.
The screen that confirms your password appears. Do not forget your
password.
El Press ENTER.
When you select a disc that exceeds the rating you have set, a message appears on
the monitor. If you want to play the disc, select ‘Yes’ and enter your password.
The unit unlocks the setting. It will be locked again by selecting another disc,
opening the disc tray or turning the unit off.
SETUP
p.
Rntings
Unlock Player
Change Password
Change Level
Temporary Unlock
■ To change settings
You must enter your designated password when you unlock the player (level is set
to 8), change the level, change the password, or unlock the playback of currently
selected disc.
Select ‘Ratings’ and then follow each procedure appears on the screen.
PCM down conversion [DVD-A] [DVD-V]
Decide whether to output high-quality digital signals (sampling frequency of 88.2 kHz and 96 kHz) or not, in accordance
with the capability of the connected component.
• If your AV amplifier etc. is capable of handling high-rate sampling frequency digital signals, select ‘No’.
• If not, select ‘Yes’ so that digital output signals are converted to 48 kHz or 44.1 kHz.
Note
• If a disc is copy-right protected or has a sampling frequency of 176.4 kHz or more, signals are automatically converted to either 48 kHz or
44.1 kHz.
Speaker settings
ENTER
If you wish to enjoy multi-channel sound reproduction connecting this unit’s 6CH
DISCRETE output terminals to your amplifier etc., you need to select ‘Multi
channel’ and make following adjustments. Also, set your amplifier’s input mode to
analog.
28