Panasonic MC-V7305 - Manual (Page 7)

iir2U*Hiuii=)fr'ÂSâÊM8LVÏiff............
____ _____________ ^ i
A
CAUTION
DO NOT get the power cord caught under the nozzle when using the vacuum or
attachments as It can be damaged by the agitator as It revolves.
ATTACHMENTS
Jjj--------- Wands (2)
Dusting
Brush ~
Crevica
Tool
Raised y,‘
Tab
The attachments should be conveniently positioned on the side of the
cieaner for easy access. Assemble the hose and attachments to
the cleaner as follows:
Place the hose in back of the handle on the hose holder. Attach
the wand to the hose by aligning the two (2) raised tabs on the
wand with the “J” slots In the hose. After guiding the tabs
along the grooves, twist to lock in place.
Place the wand in the front slot of the tool holder, twisting and
pushing down over the short hose to assure a good
connection.
Store the other wand in the round rear slot of the tool
holder. Insert the dusting brush into the top of the wand as
shown.
Place the crevice tool into the rectangular rear slot of the
tool holder.
Refer to ttie illustfatlon in the PARTS IDENTIFICATION sec­
tion for correct attachment storage.
Hose
Holder'
Dusting
Brush
Tool
Holder
Short
Hose
Agitator
(Underneath)
- 7 -