Time search – Panasonic NV-D48 Series User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TIME SEARCH
It is possible to locate the desired scene directly by inputting
the hour, minute and second of that scene.
0 Press the Fast Forward ►►/Cue Q Button.
•The VTR automatically judges whether the tape should be
fast-forward or rewound and performs the appropriate
operation.
•When the designated time is reached, the playback starts.
•The numbers in the Tape Counter do not change
during parts of the tape on which there is no
recording,
•When the tape is ejected, the Tape Counter will
automatically be reset to “0:00.00”.
Put the VTR in Stop mode.
0 Press the Time Search Button.
The indication in the Multi-Function Display changes
as shown below.
r
Input the time of the desired scene.
•The time is input by pressing the number buttons in
the order: hour, minute, second.
•The indicatioin will be counted as “0”.
• If you want to input an earlier time than “0:00.00",
press the -h/- Button so that the indication
appears ahead of the counter indication.
_
U
n
U
I
J .
u
I
Zt
j
27