Panasonic PVQ-V201 - Manual (Page 12)

Playback a Tape Record On a Tape
Ready Check List
D
All connections are made (pg. 8,15).
□ TV and VCR are plugged in.
D
TV is on and tuned to CH3, 4, or VIDEO.
D Remote is in VCR mode. (Press VCR)
1 Insert a tape,
■ VCR powercomes on.
“VCR” lights on Multi Function Display.
Press PLAY*
to play tape.
• If tape has no roc, tab (pg. 4), auto play begins.
[ Special Features During Play
Forward/ Reverse scene search
--> Press FF or REW.
--> Press again or PLAY to release.
Still (Freeze) picture
-> Press PAUSE/SLOW.
-> Press PLAY to release.
Frame by Frame picture
--> Press PAUSE/SLOW in Still mode.
--> Press PLAY to release.
Slow Motion picture
“> Hold down PAUSE/SLOW In Still mode.
--> Press PLAY to release.
These features work best in SLP mode.
The sound will be muted,
• To reduce picture noise, see “Manual
Tracking Control" on page 21.
• After the VCR is in Still or Slow mode
for 3 minutes, it will switch to Stop
mode automatically to protect the tape
and the video head.
Press STOP
to stop tape.
Press REW or FF in Stop mode
to Rewind/ Fast Forward tape.
Press EJECT on remote,
or STOP/EJECT on VCR to eject tape.
Remove loose or peeling
labels from tapes
to prevent tape jam.
1
Insert tape with rec. tab (pg. 4).
• VCR power comes on.
“VCR" lights on Multi Function Display.__________
Press CH AT, or number keys
to select channel.
• For “LINE" input, see pg, 20.
• For channels over 100, press 100 key then
press the remaining 2 digits.__________________
Press SPEED
to select record speed (pg. 4).
SP = Standard Play LP - Long Play
SLP = Super Long Play
• Speed appears on-screen._________________
Press REC
to start record.
• To edit out unwanted scenes, press PAUSE/
SLOW to pause, and again to resume recording.
Press STOP
to stop record.
One Touch Recording (record in progress),
• VCR shuts off after preset record length.
--> each press of REC adds 30 min. to
record length up to 4 hours.
Record one station, watch another,
”> press VCR/TV (“VCR” goes out on Multi
Function Display),
--> select channels at TV (recording
continues).
Watching one channel and
recording another is NOT
possible when using a Cable
Box or a Satellite Receiver.
Select channels at VCR,
• Other channels cannot be viewed during
recording.
--> press VCR/TV (“VCR” lights on Multi
Function Display),
**> select channels at VCR.
After 5 min. in Pause mode, VCR stops to
protect tape and video head.
This video recorder, equipped with HQ (High
Quality) system, is compatible with existing VHS
equipment. Only use tapes with the OBH mark.
Only tapes tested and inspected for use in 2, 4,
6, and 8 hour machines are recommended.
VCR/TV
SPEED
EJECT
SELECT/
SET
a .:PLAY
T :STOP
A ‘.REW
► :FF
REC------- O O
PROG
PAUSE/
SLOW
CH A/T
12 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]