Preparation, Setup, Step 1 connection – Panasonic KXL-807A User Manual
Page 10: Disconnecting atapt pc card from interface cable, I step 2 setting up your computer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation
Setup
Step 1 Connection
Connect the supplied ATARI PC card, interface cable and the player. For the
connection with the computer, refer to the enclosed Setup Manual.
Note:
• Use only the supplied ATARI PC card and interface cable with this player. Other
ones could damage the player or computer.
ATARI PC card
\Disconnecting ATAPt PC card from interface cable:
While pressing the side tabs of it (0)>
pull the interface cable straight (0),
Caution:
• Do not force the interface cable
since this could damage the ATARI
PC card or interface cable.
I
Step 2 Setting up your computer
To use the player with a computer, you must install a device driver using the supplied
Setup disk.
Please refer to the enclosed Setup Manual.
10