Panasonic KXL-807A - Manual (Page 20)

Troubleshooting
If trouble occurs, check the following points before returning the player for service.
Trouble Possible Cause Solution
The player is not
turned on
automatically when
the computer is
turned on.
MODE switch No. 1 is set to
ON.
• When using power from a
PC card slot:
set the MODE switch No. 1
to OFF, then remove and
insert the ATARI PC card
for Windows 95 user or
restart the computer for the
other user.
• When using AC power
supply:
connect the optional AC
adaptor.
The interface cable or ATARI
PC card is not connected to the
player or to the computer
properly.
Properly connect the interface
cable or ATARI PC card
(«s-p. 10).
Your computer
does not recognize
the player. The computer does not have
the CD-ROM player's device
drivers installed yet.
Set up the computer
{■a-p. 10).
The connector of the interface
cable is bent or broken.
Consult your dealer (or
contact Panasonic Service
Center at 1-800-PANA-SYS
for users in continental United
States).
The player or the
computer does not
function properly. The interface cable or ATARI
PC card is not connected to the
player or to the computer
properly.
Properly connect the interface
cable or ATARI PC card
(^P. 10).
The connector of the interface
cable is bent or broken. Consult your dealer (or
contact Panasonic Service
Center at 1-800-PANA-SYS
for users in continental United
States).
MODE switch No. 4 is set to
ON.
Set the MODE switch No. 4 to
OFF (®-P. 12).
20