Backing up, Backing up a computer the first time, Acking – Clickfree C2N 3.5 User Manual
Page 8
Clickfree C2N Home Backup (Mac)
Backing Up
Backing Up
If you have not yet backed up a computer onto the C2N, follow the instructions below.
If you have previously backed up a computer onto the C2N, use the BackupLink utility – see
page 12.
B
ACKING UP A COMPUTER THE FIRST TIME
I
F YOU ARE USING THE
C2N
2.5”
P
ORTABLE
A
UTOMATIC
B
ACKUP
1. Make sure that your computer is switched on and has finished starting up.
2. Connect the USB cable at the back of the C2N to a USB port on your computer.
3. You are prompted to install the Clickfree software.
4. You may be prompted to install NTFS drivers which allow you to use your C2N with
Windows computers as well.
5. When Clickfree starts to run, a
Welcome
window appears and shows the number of
seconds left before the backup starts automatically:
After you have backed up content on your C2N,
Options
,
View Files
and
Restore/Transfer
buttons appear at the bottom of the window.
Copyright © 2010 Storage Appliance Corporation.
8