Frequently asked questions, What if clickfree doesn’t start up automatically, How do i change how clickfree does backups – Clickfree C2N 3.5 User Manual
Page 17: Requently, Sked, Uestions, How do, I change how clickfree does backups
Clickfree C2N Home Backup (Mac)
Frequently Asked Questions
Frequently Asked Questions
W
HAT IF
C
LICKFREE DOESN
’
T START UP AUTOMATICALLY
?
If Clickfree does not run when you plug in the C2N:
• If you connected the C2N to a USB hub, the hub may not provide enough power
for a C2N. Try connecting to a USB port on the computer itself.
• Ensure you are using a supported Mac computer: OSX Leopard 10.5 or higher,
Intel based.
• Ensure that you have administrative rights to the computer.
If Clickfree still does not run , contact Clickfree support.
H
OW DO
I
CHANGE HOW
C
LICKFREE DOES BACKUPS
?
You can change:
• The categories of content Clickfree backs up
• Where Clickfree looks for this content
Changes you make to how Clickfree does backups are “sticky”: they are stored and
applied again to later backups for this user unless you modify them.
1. Click the icon in the menu bar and choose BackupLink Status.
2. In the BackupLink status window, click
Options
. The
Choose what to back up
window
is displayed.
3. Choose at least one category to be backed up. All of the categories are selected by
default. If there are any categories that you do not want to backup, click the check box to
clear it.
4. Click
OK
.
5. To choose the folder(s) where you want Clickfree to search, click the
Advanced
button
near the bottom right of the window, then:
•
To add a folder, click . Navigate to the folder to be added, then click
Open
.
• To remove a folder, select the folder to be removed and click .
6. Click
OK
.
7. Click
Start
to go to the backup right away without waiting for the rest of the
countdown.
Copyright © 2010 Storage Appliance Corporation.
17