Panasonic OMNIVISION PV-M2066 - Manual (Page 15)

/n
—TA Tape Operation
Your Combination VCR is equipped with
several time saving features as well as
convenient automatic functions which
make tape operation easier than ever.
Repeat Play
You can set your Combination VCR up to play a recording over and over.
(S) Push MENU to
display the menu.
MENU
Rotate and push the
WHEEL to select
“VCR” from the menu.
MAIN MENU
Rotate the WHEEL to
select “REPEAT PLAY”,
then push to select
“ON” or “OFF.”
........ SET UP VCR -------------
BEEPER : ON
SELECT : ROTATE WHEEL
SET ; PUSH WHEEL
END : PUSH MENU KEY
When REPEAT PLAY ; “ON” IS selected, the Combination VCR will play
to the end of a tape, or until it reaches a blank portion 30 seconds or more.
(Erased portions of tape are not considered blank.) Then, the Combination
VCR will automatically rewind the tape and play it again and again until you
cancel repeat play. The REPEAT indicator lights on the front panel.
All function buttons (REW, FF, etc.) are operational during Repeat Play.
Push MENU twice to exit
this screen.
MENU
You may also turn the repeat play feature on and off at the
Combination VCR by pushing the PLAY button I ' I once or
twice until the repeat indicator lights up (ON), goes out (OFF).
Auto Operation Functions
Auto Playback
When a tape is inserted, the power
comes on (Auto). If the record tab*
is removed, playback begins (Auto).
Auto Rewind
After a tape reaches its end during
playback or fast forward, the
Combination VCR will rewind and go
into Stop mode.
Playback Auto Eject
After a tape without a record tab*
is played to its end, the Combination
VCR will rewind and then eject the tape.
Rec Auto Eject
After a tape reaches its end during
normal recording, the Combination VCR
will rewind and then eject the tape.
Memory Rewind Off
When the POWER button is pushed during
rewind, rewind will be completed even
though the Combination VCR turns off.
Eject Cassette
A cassette may be ejected with power
on or off.
* For record tab information, see page 28.
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
ZER0/1MIN o
Push ZERO/1MIN in Play mode.
• The Combination VCR will go into FF search
mode and skip over 60 seconds of recorded
time. Then, normal playback will resume.
Zero Search
You can reset the Time Counter to zero and then return to that point.
DISPLAY
O
Push DISPLAY to
display the Time
Counter overlay.
0
COUNTER
RESET o
Push COUNTER RESET
to reset the Time Counter.
• Counter to 0:00:00 at whatever
point you wish on the tape.
STOP 12:00AM WNET
0:00:30
SLP
STOP 12;00AM WNET
0:00:00
SLP
Push ZERO/1MIN
zER^iN jp Stop mode.
• The Combination VCR will go into FF or REW mode and
stop at the last point the Time Counter was set to 0:00:00.
15