Panasonic OMNIVISION PV-M2737 - Manual (Page 8)

One Time Setup
\\A Check list before you begin.
□ Your Combination VCR is connected to an
Antenna, or Cable system (see page 5).
a
m
d
m
e
Using the
<1G> feevs
-T-
Whenever a menu or program screen
is dispiayed, CHANNEL UP/DOWN and
VOLUME UP/DOWN on the remote
control function as ^ ™ <3 [^only.
For VOLUME UP/DOWN functions, use
the buttons on the Combination VCR.
To Set Language, Channels, and Clock
When 1
set clot
(D
When the Combination VCR power is first turned on the channel auto set and
set clock screens appear automatically.
Push POWER to turn the
Combination VCR on.
▲
or
T
or
Push ,Tor(>for
on-screen displays in
English, Spanish or French.
• If you choose the wrong
language, please see the
“Reset all Combination VCR
Memory Functions" section on page 27.
• If you use a cable box, the cable box must be left on
for auto channel set.
SELECT mmi
PUSH CH A :Engt ish
PULSE CH ▼ :Espafiol
APP. VOL + iFrangais
© Important: If you use a cable box,
turn it on and select PBS
[ 1 station in your time zone.
^ Push A to start Channel
Auto Set and Clock Auto
-------- ' Set.
These on-screen displays will appear in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
SOX, TUNE IT TO YOUR
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY
(Case 1) '
or
7/28/1997 MON 12:00PM
(Case 2)
DST:ON
SETTING : CH 10 AUTO CLOCK SET
AUTO CLOCK SET IS INCOMPLETE
COMPLETED
PLPSH MENU TO SET CLOCK
END : PUSH CH UP KEY
Case 1) Confirm that displayed time is correct and
push A to exit,
if the displayed time and D.S.T. are incorrect,
In the rare event that you live within broadcast range of two PBS
stations in two different time zones, the Combination VCR may
recognize the wrong PBS station. To correct this situation, do the
following;
a. Make a note of the SETTING: CH number shown on-screen and push A
to exit.
Delete the setting channel from the Combination VCR channel memory.
(See the Add or Delete a Channel section on the next page.)
Push MENU to display the menu.
Push ^ <3 to select “CLOCK," and then push MENU to display the
SET CLOCK screen.
• If you use a cable box and have multiple PBS stations, tune the cable
box to a different PBS station and try auto clock set again using the
menu.
Push A ^ to select “AUTO SET,” and then push [^to set and to^start.
- Auto clock set will be performed when the Combination VCR is
turned off the first time each day. If you use a cable box and you want
auto clock set to be performed, the cable box must be left on and
tuned to the PBS channel at the time the Combination VCR power is
turned off.
■ If for any reason the time is changed manually, automatic time
correction will not occur.
8