Panasonic CT-27S20 - Manual (Page 12)

Control Operation
Helpful Hints:
> Press the TV Mode Selection button to operate TV
Remote functions, if necessary
_______
PoWBr Button
— Press the POWER button after
selecting a mode to turn ON Press again to turn OFF
VolUfTIG Button
— Press the or button
for desired listening level (when On-Screen menus are
not displayed)
Located On Remote Control
A
IncreasBS
ValumB L bvb I
Voluma L bvb I
Mute Button
— Press the MUTE button to quickly
reduce sound level (Mute will appear on screen) Press
again to restore sound
Channel Change (UP/DOWN)
Press the ^ or^ button to sequentially scan through
programmed channels (when On-Screen menus are not
displayed)
NOTE; Press the TV Mode button to operate TV
Remote functions, if necessary
Located On Remote Control
Salects N bk I
LawsrChannal
S b I bc I s Navt
HigharChannel
Numeric Keypad (O through 9 Buttons)
Press two digits on numeric keypad (0 through 9 buttons)
(Example press 0, then 5 for channel 05) For channels
over 99, press three digits on keypad
VCR Function Buttons
- The VCR
FUNCTION buttons have been designed to operate
numerous brands of VCRs The infrared code must be
obtained prior to use (Please refer to Programming the
Universal Remote for programming instructions )
NOTE: Press the VCR Mode Selection button to
operate VCR Remote functions
Helpful Hints:
Helpful information will display On Screen momentanly
when Receiver Is first turned on and when the
channel is changed.
NOTE: If “SPEAKER OFP is displayed On Screen
after pressing the VOLUME button, refer to
Audio Menu to turn Speakers “ON”.
REU PUT FF
HOVE SIZE PIP
REC STOP PAUSE
SMAP
rln
TV/VcH Vffl/DSS CH
hW-k/h
o CD
- 1 2 -