Panasonic WVCF20 - Manual (Page 8)

ADJUSTMENT
1. Panning
The “E" line on the Panning Table can move be­
tween the "F" and ‘'G" lines.
2. Tilting of the camera
Tilting angle is shown below.
Note : The adjustment for picture tilt is normally re­
quired. (refer to the item 3 of ADJUSTMENT
on page 7)
4. Focusing
Precaution :The focus adjustment should be done
at the same time of the Camera Angle
Adjustment.
4-1 .Remove the Dome Cover (13) from the camera.
(Refer to item 2-1 of INSTALLATION on Page 5)
4-2.Loosen the Zoom Lock Lever.
4“3.Set the angular field of view according to the
scene desired.
4"4.After setting the angular field of view, tighten
the Zoom Lock Lever.
4"5.Loosen the Focus Lock Lever.
3. Picture Tilt
Loosen the two Lens Holders (12) and adjust the
picture tilt by turning the Camera Head (9).
4"6.Set the correct focus by turning the Focus Ring
( 10 ).
4-7. After setting the correct focus, tighten the Focus
Lock Lever.
-7-