Operation instructions (lcd panel functions shown), Setting the clock (2-way – lcd remote) – Crimestopper Security Products CS-2000DP-TW2 User Manual

Page 16

Advertising
background image

16


1

ST

AUX. OUTPUT TRUNK

POP (FLASH) (OR HOOD
OPEN)

OPERATION INSTRUCTIONS (LCD PANEL FUNCTIONS SHOWN)

VALET

DATA TRANSLATE IGN TRIGGER (FLASH) WARN AWAY (FLASH) SHOCK SENSOR(FLASH)

SETTING THE CLOCK (2-WAY – LCD REMOTE)

1. Press button #5 (recall) on the side of the remote control 5 times.
2. The remote will beep and the AM or PM display will begin flashing.
3. Press button #3 (trunk) to go to the next item AM – PM – Hour – Minutes.
4. Press button #1 (lock) to increase time.
5. Press button #2 (unlock) to decrease time.
6. Press button #4 (start) to disable or enable beep.
7. Press button #5 (recall) to exit setup or wait 7 seconds, the LCD light will turn off.

ARM

DOOR OPEN (FLASH)

PANIC (FLASH)
CAR JACK

DISARM

Advertising