Panasonic TX-D9S45MB - Manual (Page 11)

Adjustments
Adjustment menu
Э
Contrast
Adjust the screen contrast to match the brightness level in the room.
Pressing the [U key toggles between brightness and contrast.
Direct operation]
Even if the menu screen does not appear, the contrast can be adjusted by pressing
the Э or e key. If the & and ►! keys are pressed at the same time, the
maximum level (100) will be set.
Brightness
! Adjust the brightness to match the brightness level in the room so that the level
will be easy to see.
Pressing the Ш key toggles between contrast and brightness.
Note: It the Э and в keys are pressed at the same time on the Brightness
____ adjustment screen, the standard level (50) will be set.
Щ Size & Pos.
! Press the
[Ц
key to select the zoom
/
horizontal position
/
horizontal size
/
vertical
position / vertical size adjustments.
Press the Ш key to save the adjustment.
Zoom
! Both the horizontal and vertical size of the image can be adjusted at the same
time: however, the aspect ratio cannot be changed.
Press the Э key to make the image smaller, the key to make it larger.
D H. Position !
The horizontal position of the image can be adjusted.
Press the S key to move it to the left, the key to move it to the right.
H H. Size
The horizontal size of the image can be adjusted.
Press the Э key to make the image smaller, the È key to make it larger.
Note: Setting the image in the center of the screen to start will make the
adjustment easier.
V. Position
! The vertical position of the image can be adjusted.
Press the Э key to make it downward, the ►j key to move it upward.
m V. Size !
The vertical size of the image can be adjusted.
Press the Э key to make the image smaller, the key to make it larger.
Note: Setting the image in the center of the screen to start will make the
__ adjustment easier.
i/ (I Geometry
: Press the
CD
key to select the vertical pincushion
/
side pincushion balance
/
trapezoid / parallelogram / Geometry 2 adjustments.
___ Press the QJ key to save the adjustment.
nr V. Pincushion !
The image can be adjusted for barrel distortion.
Press the 5« key to decrease the Pin / Barrel distortion of the image,
__ the K key to increase it.
ГТ Side Pin. Bal. !
The image can be adjusted for the side pincushion balance to the left
and right. Press the key to expand to the left of the image, the €
key to expand it to the right,
r\ Trapezoid
!The image can be adjusted for trapezoidal distortion.
Press the 3 key to make the top edge narrower, the key to make the
___ bottom edge narrower.
/~~7
Parallelogram
!The image can be adjusted for parallelogram distortion.
Press the Э key to collapse the parallelogram to the left, the ►] key
to collapse it to the right.
► ► Geometry 2 ;
Press the
в
key to change the sub OSD screen.
Press the \J\ key to select the Top Corner I Bottom Corner / S-Curve 1 /
S-Curve 2 adjustments.
Top Corner
! The image can be adjusted for vertical pincushion distortion in the
top corner.
Bottom Corner
The image can be adjusted for vertical pincushion distortion in
the bottom corner.
О
О
S1 S-Curve 1
S2 S-Curve 2
The image can be adjusted for vertical pincushion distortion in the S-
Curvel.
i
1
> I
\
The image can be adjusted for vertical pincushion distortion in the S-
1 0