Panasonic mc-v9620 - Manual (Page 9)

PERFORMANCE FEATURES
OVERLOAD PROTECTOR-
POWER NOZZLE
The overload protector stops the motor when the
brush jams and prevents belt breakage.
TO CORRECT PROBLEM;
1. Unplug electrical cord.
2. Check brush and brush support areas for
excessive lint build-up or jamming.
3. Clean jammed area. (See pages 9-10).
TO RESET; Press reset button on top of the
POWER NOZZLE. Plug In and turn on cleaner.
SUCTION
CONTROL
The suction
control Increases
or decreases the
suction for dif­
ferent fabric and
carpet weights.
Opening the
control decreases suction for draperies and
lightweight rugs. Closing the control increases
suction for furniture and carpets.
HOSE SWIVEL
The hose swivel allows
the hose to turn without
moving the canister.
This is helpful for
cleaning in small areas.
Check hose for twisting
before pulling canister.
PERFORMANCE INDICATOR
When the unit is running
the tines in the indicator
windows will be clear If
there are no clogs. When
the lines turn completely
red there is a need to check the dust bag for
being full or the other areas that may be clogged.
See page 4.
NOTE: Red lines may appear when using
attachments or when cleaning new carpet, due to
reduced air flow by the attachments themselves
or new carpet fuzz filling the bag quickly.
VACUUMING TIPS
Suggested sweeping pattern.
For best cleaning action, the POWER NOZZLE should be pushed straight away from you and pulled
straight back. At the end of each pull stroke, the direction of the POWER NOZZLE should be changed to
point into the next section to be cleaned. This pattern should be continued across the rug with slow,
gliding motions.
NOTE: Fast,
jerky strokes
do not
provide
complete
cleaning.
Small areas can be
cleaned without moving
the canister. The hose
swivel allows the hose to
turn from side to side
while the canister stays
in place. Check hose for
twisting before pulling
canister.
Carpeted stairs
need to be
vacuumed
regularly. For
best cleaning
results, fully
close the
suction control.
-7-