Canon A430 - Manual (Page 73)

71
S
h
o
o
tin
g
/Vi
ew
in
g
I
m
ag
es o
n
a
T
V
set
Shooting/Viewing Images on a TV set
You can use a video-compatible television as a monitor to shoot or
play back images when it is connected to the camera with the
supplied AV Cable.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (pp. 22, 26). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
1
Turn off the Camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
zOpen the terminal cover by
slipping a fingernail under the
right edge and plug the AV cable
in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on
the TV.
4
Turn on the TV and switch it to Video mode.
5
Turn on the camera.
VIDEO
AUDIO
IN Yellow
Black