Panasonic RX-DT670 - Manual (Page 16)

RADIO
■ Memory presetting
You can memorize the broadcast frequencies for up to
14 radio stations into the unit's preset memory.
1. Tune to the desired broadcast using the manual tuning or
FM auto tuning.
Press the memory button.
The program indicator in the display, will flash for several
seconds. If the program indicator stops flashing, repeat
this step, otherwise the broadcast frequency will not be
stored in the next step.
2 .
3. Press one of the preset memory channel buttons to
select the channel number.
4. Press the memory button again.
The program indicator will stop flashing and the selected
channel number will indicate on the display.
™ / 8 8 .
t n
t u
msamsm
5. Repeat steps 1 -4 to program a station into each of the
remained memory channels.
When a new frequency has been programmed, the
frequency previously programmed in the channel will be
cancelled,
■ Memory tuner operation
Press one of the preset memory channel buttons to receive
your desired radio station.
■ Antennas
FM:
Pull out the telescopic antenna and adjust its length and
angle for optimum reception.
AM:
The sensitive ferrite core antenna inside the set will provide
excellent AM reception in most areas. For optimum recep­
tion, turn the set in the direction which gives the best results
since the ferrite core antenna is directional.
■ Most recent memory
The most recent memory system “remembers" the broad­
cast station last tuned to when the radio is switched “OFF”
or another function is selected. The station will be automati-
caily tuned when the unit is switched "ON” or the radio
function is selected.
16