Panasonic CT-20G21 - Manual (Page 16)

Channel Caption
Channel Caption (Station Identifier)
This feature allows you to enter the call names of up to
30 stations into memory (using up to 4 characters for
each station) The call name will then display along with
the channel number when changing channels or press­
ing RECALL
Located On Remote Control
Selects crAdjusIs
Features Whan
Menu
IS
Displayed
HighlighlDesired
Featura When
Menu IS Displayed
CH03 ,
^_Channel Caption
(Stalionldanlilier)
1 Press the ACTION button to display the Mam Menu
2 Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Channel Caption Icon
3 Press the ACTION button to select and display the
Channel Caption Menu
Displays and Exits Menus
ACTION
CHANNEL CAPTION
ENTER CHANNEL NUMBER
ENTER CAPTION":;: - ^
LATO MOVE R S “
CURSOR
M ► TO SELECT -
CH ANNEL''^?'»^''
Helpful Hints:
When the Maximum amount of station identifiers are
entered, “FULL" will be displayed in the caption
position
4 Press the VOL LEFT or RIGHT button, or use the
Remote Control Keyboard (0-9), to enter the
channel number you wish to assign a Station
Identifier
5 Press the CH DOWN button to highlight “ENTER
CAPTION"
6 Press the VOL LEFT or RIGHT button to select first
character in Station Identifier Then press the CH
DOWN button to move cursor to the second position
and repeat until the complete Station Identifier is
entered (up to 4 characters)
7 Press the CH UP or DOWN burton to highlight
"ENTER CHANNEL NUMBER" Then repeat steps
4 through 6 to continue adding Channel Station
Identifier(s)
B Press the ACTION button twice to exit the Channel
Caption Menu
NOTE: To delete a Channel Caption (Station Identifier)
from memory all four character positions in the
"ENTER CAPTION" area must display a dash
mark (-)
- 16 -