Panasonic CT-20G21 - Manual (Page 18)

■ Set Time
- Ant (Antenna)
■ Auto Prog (Program)
■ Manual Prog (Program)
- CC (Closed Caption) on Mule
- CC (Closed Caption) Mode
■ English, Español (Spanish) or Français (French)
Set-Up Features
Located On Remote Control
Selects or Adjusts
Fsatures When
Menu IS Displayed
HighlighlDBsired
Feature When
Menu IS Displayed
Displays and Exits Menus
^ACTION
Set Time — Clock (when set) will display on screen
at initial Turn On", after a channel change and when
pressing the RECALL button The time must be set first
in order to operate the Program ON/OFF Timer
1 Press the ACTION button to display the Main Menu
2 Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon
3 Press the ACTION button to display the Set-Up
Menu, "SET TIME" will be highlighted
The proper Input mode must be selected for the type of
signal at the antenna input
■ TV mode is used when the Receiver is not connected
to a cable TV system, for example when using a
VHF/UHF antenna (channels 02 - 69)
- Cable mode is used when the Receiver is connected
to a Cable TV system and you are not using a cable
company converter box (channels 01 - 125)
Ant (Antenna)
Press the ACTION button to display the Mam Menu
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon
Press the ACTION button to display the Set-Up
Menu
3ïfTV 1«
SET-UP
ANT __________ TV_____
таюН:миТЕ1 OFF
^ espanol T rancais
OFF _ ,
Press the CH DOWN button to highlight "ANT'
Press the VOL LEFT or RIGHT button to select TV
□r CABLE
Press the ACTION button twice to exit the Sel-Up
Menu
Press the VOL LEFT or RIGHT button to set hours
(set AM/PM accordingly)
Press the CH DOWN button to select minutes
position
Press the VOL LEFT or RIGHT button repeatedly to
set minutes
Press the ACTION button twice to exit the Set-Up
Menu
- I B -