Preparations, Example, Operations – Panasonic G-CODE NV-FJ620 User Manual
Page 10: At the set time (h:m) point, Setting the clock of your vcr, Time reset function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Clock of Your VCR
The clock will operate for at least 3 years in total after it has
been set, - in the event of a power failure, it will operate on its
backup system. After 3 years, it will only operate for 1 hour
on its backup system.
Preparations
- Confirm that the TV is on and the VCR viewing channel is
selected.
- Turn on the VCR.
Example;
Date; 16 October, 2005
Time; 20:15
Operations
Press the MENU button ® to
display the Main menu on the TV
screen.
Press the Cursor buttons (A V) ©
to select [CLOCK SET] then press
the OK button 0.
Set each item by pressing the
Cursor buttons (AV^) ©. Press
the Cursor button (◄) © to return to
the previous item.
At the set time (H:M) point:
- When it is kept pressed, the
Indication changes in 30 minute
steps.
- There is no need to press the
Cursor button (►■)
On Screen Display
» CLOCK SET
TUNER PRESET
GH AOD&OELBTE
OPCODE CN SET
SYSTEM
OP'nON
кCLOCKSET
TUNER PRESET
CHAOO&DELETE
Q-COOE CH SET
SYSTEM
ОРЛОМ
Time Reset Function
If the clock is less than two minutes slow or fast, it can easily
be reset to the proper time.
Example:
Resetting the clock to 12:00.00
1 Press the MENU button © to display the Main menu on
the TV screen.
2 Press the Cursor buttons (A V) © to select [CLOCK SET]
then press the OK button
3 When the current clock display on the VCR is between
11:58,00 and 12:01.59, press the MENU button ® as
soon as you hear the 12:00.00 signal. This resets the
time to 12:00.00.
Press the MENU button
0.
~
The clock starts.
10