Panasonic G-CODE NV-FJ620 - Manual (Page 11)

Preparations for G-Code
Programming
Identification numbers must be set for G-Code programming.
Proceed with the G-Code programming operation described
on page 22, and the identification numbers of the TV stations
concerned will be set automatically. This will allow G-Code
programming to be undertaken without performing the
operation described on this page. However, you can follow
the setting procedure described below if you wish to set the
identification numbers of all the TV stations prior to actual
programming.
[Identification numbers] refer to the numbers used for
identifying TV stations.
The programme positions on the VCR receiving the TV
stations are set in these identification numbers.
Have a newspaper or magazine which lists today’s local TV
station programmes and G-Code numbers on hand.
Preparations
- Set the clock of the VCR. See page 10.
- Store TV broadcasts in your VCR. See pages 7-9.
- Confirm that the TV is on and the VCR viewing channel is
selected.
- Turn on the VCR.
Operations
1 Press the MENU button 0 to
display the Main menu on the TV
screen.
Press the Cursor buttons ( A Y ) ©
to select [G-CODE CH SET] then
press the OK button ©.
Press the Cursor buttons ( A T ) 0
to select the identification number
(GUIDE CH) (001-255).
Press the Cursor buttons ("^►) ©
then press the Cursor buttons ( A T )
© to select the programme position
(1-99, A1 or A2).
- To set the other TV stations, press
the Cursor buttons (◄►) © then
repeat steps 3 and 4.
On Screen Display
► CLOCK SET
TUKER PRESET
CH ADO&DELETE
G*CODE CH SET
SYSTEM
OPTION
CLOCKSET
TUNER PRESET
CH ADDSDELETE
*^ 0-COOECHSET
SYSTEM
QPVOH
L.J ' -■ -i
'.U
5 Press the MENU button © twice to exit the On Screen
Display.
Note:
To receive satellite stations, the satellite receiver must be
connected to the VCR and programme position must be set
depending on the type of connection.
A1/A2: When the satellite receiver is connected to the
AudioA/ideo input sockets (AV1/AV2).
- When the satellite receiver is connected by means of the
RF coaxial cable, set to a free programme position
between 1 and 99.
The guide channel numbers are subject to change. Please
refer to the guide channels listed in the latest newpapers or
TV listings.
Example:
(NV-FJ620A)
TV station Position Number
Identification Number
(GUIDE CH)
ABC 2 002
ATN 7 007
TCN 9 009
TEN 10 010
SBS 28 028/001
Example:
(NV-FJ620EA)
TV Station
Identification Number
(GUIDE CH)
TV ONE 001
CHANNEL 2 002
TV3 003
*SKY TV MOVIES 004
*SKY TV SPORTS 005
*SKY TV NEWS 006
*SKY ORANGE 007
*SKY DISCOVERY&TRACKSIDE 008
CTV 011
* Connection to the Sky decoder
When the Sky decoder is connected to the AudioA/ideo input
sockets:
Set to [A1] or [A2].
When the Sky decoder is connected by means of the RF
coaxial cable:
Set to the programme position that the Sky decoder is
turned to.
- When G-Code programming, turn on the Sky decoder and
select the desired Sky channel.
11