Installation of camera, Prevention of blooming and smear, Lens maintenance and cleaning – Panasonic WVBP110 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION OF CAMERA
• Mounting from the top
Remove the mount adaptor irom the bottom of the
camera as shown. The hole is the standard photo
graphic pan-head screw size (1/4‘ - 20).
Make sure that two original screws are used when
mounting the mount adaptor; longer type screws
may damage inner components.
PREVENTION OF BLOOMING
AND SMEAR
When the camera is faced toward spot light or other
bright lights and light reflecting objects, smear or
blooming may appear. Therefore, the camera should
be operated carefully in the vicinity of extremely bright
objects to avoid smear or blooming.
-Smear
Bright object
LENS MAINTENANCE AND
CLEANING
1. Remove the lens, and inspect the camera CCD
faceplate through the lens mount opening to
assure that the faceplate is free of smudges or
particles of dirt.
2. Clean the CCD faceplate, if necessary, using lens
tissue or a cotton tipped applicator and ethanol.
3. install the new lens.
-
10
-