Panasonic WVBP110 - Manual (Page 7)

(1 ) Camera Mounting Screw Hole
This threaded hole (1/4” - 20) is used to mount the
camera onto a mounting bracket or tripod.
(2) Flange-backAdjusting Ring
This ring is used to adjust the'back focal length or
picture focus by rotating this ring to counterclock­
wise.
Caution:
Always set this ring to fully clockwise before
mounting the lens.
(3) Lens (Option)
See page 8 for details on lens selection.
(4) Video Output Connector (VIDEO)
A 1.0 Vp-p/75 ohms composite video signal is pro­
vided at this connector.
(5) AC Power Cord
(6) AC 24V In Terminal (AC 24V IN)
This terminal accepts 24V AC power source
(19.5V -28V). Be sure to connect grounding lead
to the GND terminal.
Cautions:
1, Connect this to a 24V AC class 2 power sup­
ply only.
2. To prevent fire or shock hazard, the UL listed
wire VW-1, style 1007 should be used for the
cable for AC 24V Input Terminal.
ELC (Electronic Light Control)
In this mode a continuously variable electronic shutter
is employed to automatically control exposure times in
the CCD Image Sensor, according to the incoming
light level.
With this mode selected, fixed or manual iris lens can
be used instead of an ALC type lens.
Caution:
Under certain unique lighting conditions, the fol­
lowing may appear:
-
5
-