Panasonic SC-AK27 - Manual (Page 17)

DISC
i—t
□
1 —-—2—^—
a
4------- 5—I
a a
3
a
Specified disc number
1 --------------- 2 —
a a
—3
a
4--------5— 6 SIO
a a a a
7 8 9 Q
a a a a
Specified track number
'K
^ --I
Program order
=h
►/ll/A
m
cz > ~
I t—i >— j
Indicates
program mode
tiar»
LJ t LJ
Listening to compact discs
Program play
by remote control only
You can program up to 24 tracks,
□ Press [CD].
Ensure CD is stopped.
Press [PROGRAM].
Press [DISC].
(within 10 seconds or so)
Press [1] - [5] to select the disc you want.
Press the numeric button to select the desired track.
Repeat steps B through B until you have pro­
grammed all the tracks you want.
Press [►/Il/A].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] In the stop mode.
Programmed contents will be saved in memory.
Pressing [■] will cancel program play, but it will also erase the entire
program.
To select a two^igit track
Press [¿10] and then the two numbers you want.
When “CD FULL’’ appears Q
The number of programmed tracks is limited to 24, No further tracks
can be programmed.
You can do the following during program mode B
• Check program contents.
Press or
Every time you press one of the buttons, the track and program No.
are shown on the display.
• Add to the program.
Repeat steps Q through Q.
• Cancel entries.
I
W|
I
S
I
S’
c
i!
From the last
programmed track
Press [CANCEL].
A specified track
only
Select the track with [K^/-<^] or
[►►/►►!], and press [CANCEL] within
3 seconds.
All tracks Press [■].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM],
2. Press [►/Il/A],
If you program a track not on your CDs
The track is initially programmed, but during program play, the player
will skip that track and will continue playing from the next programmed
item.