Panasonic OMNIVISION PV-S4670 - Manual (Page 14)

One Time VCR Setup
Alternative Instructions
Complete the following steps if, during one time
setup, any of the following applies:
A
You selected NO in step 4 on page 12 (you do not
use a cable box or DSS receiver).
B
You selected connection method 2 (VCR-CABLE
DSS BOX- TV) in step 5 on page 12.
C You selected NO in step 7 on page 12 (your cable
box or DSS receiver is not remote controllable).
D
You use a DSS receiver and selected YES in step
10 on page 13.
E
Cable Box or DSS receiver can not be controlled
in step 10 on page 13.
Turn on the cable box and set
it to the local PBS channel.
• If you live near a different time
zone, make sure to set the
channel in your time zone.
• If you use a DSS receiver, it
must be turned off.
CKANNELiCLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX. TUNE IT TO YOUR
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY
VCR
Q
Push CH A to start
CHANNEL AUTO
SET and AUTO
CLOCK SET.
The following displays will appear in sequence.
“CH AUTO SET PROCEEDING”
“CH AUTO SET COMPLETED"
“AUTO CLOCK SET PROCEEDING”
This screen appears to confirm that
auto clock set is completed.
VCR
iQs
Confirm that the
time is correct and
push CH A to exit
this screen.
If this screen appears,
auto clock set is not
available in your area.
Please set the clock
manually as described
at right.
12/25/1996 WEO12:00PH
DST: ON
SETTING : CH02
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
AUTO CLOCK SET
IS iNCOMPLETE
PUSH MENU TO SET CLOCK
If the displayed auto clock set time and
D.S.T. are not correct
If you live close to two different time zones, the VCR may
recognize the wrong PBS station as the setting channel. If this
happens, please complete the following steps.
1 Make a note of the SETTING: CH number on screen and
push CH A to exit.
2 Delete the setting channel form channel memory. (See the
Add or Delete a Channel section on page 15.)
3 Push MENU button to display the menu.
4 Use the Wheel to select “SET CLOCK" and then to select
“AUTO SET."
• If you use a cable box and have multiple PBS stations, tune
the cable box to a different PBS station and try auto clock
set again using the menu.
14
Manual Clock Set
(In case Auto Clock Set could not
be performed)
1
Push MENU to
display the set
clock screen.
SET CLOCK
BY ROTATING WHEEL
:PUSH WHEEL-»
TO END PUSH MENU KEY
2
Rotate and push
the Wheel to select
and enter the month,
date, year, time and
D.S.T. (Daylight
Saving Time).
• “DST:ON” automatically adjusts for
daylight saving time. (See page 5.)
To Make Corrections,
push the Wheel or CLEAR button
repeatedly to move back or forward to
the desired item.
3
Push MENU twice to
staULhecLock and
exit this mode.
21
2/1996 FRI
DST:ON
TO CORRECT
PUSH WHEEL OR CLEAR KEY
TO START PUSH MENU KEY