Panasonic WV-BM1400 - Manual (Page 4)

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
<FRONT VIEW> <REAR VIEW>
y—■ --------y
L-------- ----- ______ -i
1. Power On/Off Switch (POWER ON/OFF)
This is a push-push type switch which turns the power
of the monitor on and off.
Press once and the switch remains down for turning
on the power of monitor.
Press again, the switch comes up for turning off the
power of the monitor.
2. Power Indicator
Tfiis indicator lights to indicate that the Power Switch
(1) is turned on.
3. Scan Size Selection Switch (SCAN SiZE, UNDER/
NORMAL)
This is a push-push type switch which selects the
scan size.
Press once and the switch remains down for selecting
the Under Scan mode.
4. Horizontal Hold Control (H. HOLD)
This control is used to lock the picture in horizontally.
5. Height Control (HEIGHT)
This control is used to adjust the height of picture.
6. Vertical Hold Control (V. HOLD)
This control is used to lock the picture in vertically.
7. Vertical Linearity Control (V. LIN)
This control is used to correct for vertical nonlinearities
in the picture.
8. Bright Control (BRIGHT)
Turn this control clockwise to increase the picture
brightness.
9. Focus Control (FOCUS)
This control is used to adjust for best focus of the pic­
ture.
10. Contrast Control (CONTRAST)
Turn this control clockwise to increase the picture.
-
2
-