Panasonic Compact Plain Paper FAX KX-FP270 - Manual (Page 20)

Finding the Controls
Location
• Used to send faxes using the IQ-FAX function (p. 5S
• Used for the Caller ID service (p. 46 to 49).
• Used to erase recorded messages (p. 94).
® Used to erase your own recorded greeting messages (p. 92).
• Used to play recorded messages (p. 94).
Used to record greeting messages (p. 91).
Used to record memo messages and a telephone conversation (p. 96).
Dial keypad
• Used to print a quick
reference (p. 19).
Used to change from
pulse to tone during
dialing (p. 36).
ABC DÊF
MNO
POPS TUV WXYZ
Cz3® ®
OPER
cracËD
TONE
Display panel
uEMcm cuis
^ PLAY >
RECORD ^MESSAGES ERASE
Q —) CZi
IQ'FAX
AUTO ANSWER ____________ VOLUME
TAD/FAX ON O FIU^ REMAINING
G-
'■----------- I Lyn/iMJ ' rni I
• Used as a hookswitch
(p. 36).
• Used for slow
playback (p. 95).
» Used for voice muting
(p. 34).
o Used for quick playback
(p. 95).
« Used to redial the last
number dialed (p. 34, 54).
• Used to insert a pause
during dialing {p. 36).
® Used for speakerphone
operation.
® Used to turn on/off the auto
answer mode (p. 70, 71).
o Used to stop an operation
or cancel programming.
® Used to delete a character
or number (p. 30, 32, 41).
® Used to adjust volumes (p. 33).
® Used to select feature settings
during programming.
o In the copy mode, used to select
an enlargement/reduction rate
(p. 87, 88).
o Used to initiate fax transmission, reception or copying,
o Used to store a setting during programming.
® Used to check the amount of remaining film {p. 118).
® In the copy mode, used to choose “Collated” or “Uncollated” (p. 87
20