Panasonic KV-SS855D - Manual (Page 40)

Replacing the Roller Modules
5 Take out the retard roller module
in the optional "Roller Exchange
Kit (KV-SS041)".
For supplies and accessories:
Call 1-800-346-4768 (U.S.A. only)
or your dealer.
6 While pushing down the metal
holder of the retard roller module,
install the hew retard roller mod­
ule in the scanner, and push down
the levers at both ends until they
click into position.
• Follow the sequence of © through (3)
for installation.
7
8
Hold the paper feed cover using
both hands, install it in the scan­
ner when installing the paper feed
cover, the two hooks must se­
curely latch on the scanner pins.
Check that the hooks are securely
latched by viewing through the
small openings A. Push it into
place until you hear a clicking
sound.
Follow the sequence of © and
installation.
for
Install the paper feed roller mod­
ule which was removed in step 1,
and close the front door which
was opened.
• For details on how to install the paper
feed roller module, refer to steps 6
and 7 in "Replacing the paper feed
roller module".
• After replacing, clear the "Replace
Roller" display.
(Refer to page 20)
40