Record on a tape, Check list before you begin, Insert a cassette with record tab – Panasonic OMNIVISION PV-8450 User Manual
Page 17: Keys to select a channel, Press speed to change the recording speed, One touch timer recording (otr), 5 press stop to stop recording, Record one program while watching another, Selecting channels at the vcr, One touch recording (otr)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Record On a Tape
l^c
Check list before you begin.
G
All connections are made.
(See pages 6-9.)
G
VCR is plugged in.
G
TV is turned on and set to the VCR
channel (CH 3 or 4).
1
Insert a cassette
with record tab
VCR power comes on autonnatically.
<1
b 4
Press CH
AiW
or NUMBERED
keys
to select a channel.
• Or, press CHANNEL A/T on the VCR.
• Holding down CH
A/W
will increase
the channel search speed.
• To record from an outside source,
press CH A/T or INPUT to select
“LINE" {see page 30).
Press SPEED
to change the
recording speed.
• SP = standard Play,
LP = Long Play
SLP = Super Long Play
(See page 5.)
4
Press REC/TIME
on the remote control or VCR to
start recording.
• To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After the VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
X
-
One Touch Timer Recording (OTR)
The VCR starts recording and hjms itself off at a preset time.
in step 4, press REC/TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
c
Normal Ree—►0:30—►1:00
00*«—3:00 ♦—2:00
►
1:00
1:30-«-^
TIMER" lights in the Multi Function Display.
The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
5
Press STOP
to stop recording.
• Or, press STOP/EJECT on Uie VCR.
Record One Program While Watching
Another
1
Press VCR/TV while recording is in prepress to turn
off the VCR indicator in the Multi Function Display.
2
Use the TV channel controls to select a program.
The VCR will continue to record your program while
you watch any channel you choose.
• To switch back and forth between the recording and
viewing channel, press VCR/TV.
Selecting Channels at the VCR
1
Turn your TV and VCR on.
• VCR Indicator lights on the Multi Function Display.
If indicator doesn’t light, press VCR/TV to turn it on.
2
Use CH
A/W
on the remote control or VCR to
select channels.
• To switch back to TV channel selection, press
VCR/TV to turn VCR indicator off, or simply turn
the VCR power off.
17