Panasonic PV-M2768 - Manual (Page 13)

TV Timer Features
|\^Check list before you begin.
Q All connections are made (see page 5).
Q Your Combination VCR is plugged in.
On-Timer with Alarm Feature
The Combination VCR can be set to automatically power on in one of 3
modes (TV, Playback, or FM radio). You can also combine the On-Timer
with a one minute alarm that gradually increases in volume.
1
Press ON-TIMER to display the ON
TIMER screen.
Press A V to select and ► to fix
the On-Timer time and also to
choose the On-Timer mode {TV,
PLAY, or FM radio). See the AV
selection order shown below.
• Make sure a tape is inserted if Playback
mode is selected.
• See “FM Radio Feature” on page 15 for
instructions on how to preset FM stations.
CH02—CH03..... CHI 25
---- xt/OrifT/IMER........
6:-AM CH-
/|^ /|\
SELECT :* ▼ KEY
SET :► KEY
END :ON-TIMER KEY
r
CHOI
W m 9—FM8 ■FM1
.............. ON TiuEia 1-7----------------
6:00AM CH125
ai ! arm > on
SELECT;A ▼ KEY
SET
;•« ► KEY
END :ON-TIMER KEY
.............. ON TIMER .......................
6:00AM CH08
...........
O Press AV to select alarm “ON” or
“OFF.”
When “ON” is selected,
an alarm will gradually increase in
volume for one minute or until cancelled
by pressing any button on the remote or
________
Combination VCR (including Volume
UP/DOWN). When the alarm sound stops, the sound of the
mode you selected will ensue.
To Make Corrections,
use
AT
and to move back and correct as necessary.
CANCEL:ADO/OLT KEY
SELECT:* ▼ KEY
SET
► KEY
END :ON-TIMEH KEY
4
Press ON-TIMER to set the On
Timer. This screen will appear for
about 5 seconds.
• The ON TIMER indicator lights on the front
panel.
ON TIMER SET
To cancel,
press ON-TIMER to redisplay the screen in step 3. Then, press
ADD/DLT to clear the time (“6" is flashing). Now, press ON-TIMER
to end. “ON TIMER END" appears on-screen for a few seconds.
If no button on the remote or Combination VCR (including
a button used to turn off the alarm) is pressed within 60
minutes after the Combination VCR turns itself on, it will
turn itself back off.
NOTE
Set the Sleep Timer
The Combination VCR can be set for auto power off.
Press SLEEP repeatedly to set the sleep
sleep timer so
SLEEP TIMER 60
• Each press will change the time in the order shown -f
alright. SLEEP^TIMERSO
• If you press DISPLAY with the SLEEP TIMER set, SLEEP TIMER oo
the remaining time will appear on-screen, *---------------
To Cancel, press SLEEP repeatedly until “SLEEP TIMER 00" appears.
13