Panasonic PV-M2768 - Manual (Page 19)

Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few seconds to
cancel the Tinner Recording.
• Any future daily or weekly recordings will be
performed as programmed.
Replace Program Contents:
(Recording is not in progress)
1 Do steps 1 and 2 on previous page.
All currently set programs will be
displayed on-screen.
Press AT
repeatedly to
select the
desired
program, and
then press ► to
display the
settings.
(See page 18.)
P DT START STOP CH SPD
2 8 10
3 10 8
4 SU g
OOp 12
OOp 9
OOp 10 OOp 125 SLP
OOp 10 SP
OOp L SLP
SELECT 1-8:A ▼ KEY
BÍTER :► KEY
END :PHOG KEY
START STOP CH
8 SAT 10:OOP11:OOP125
ÜBÜÓBiánimB
SELECT:* ▼ KEY
SET
► KEY
END :PHOG KEY
3 Press
AT
repeatedly to
select, and then
press ► to
enter
replacement
information,
4 Press PROG three times to exit this mode
and return to the normal TV screen.
Review or Clear Program
Contents:
(Recording is not in progress)
a Do steps 1 and
2 on previous
page. All
currently set
programs will be
displayed on­
screen.
P DT START STOP CH SPD
2 8 10:00pl2:00p125 SLP
3 10 8:00 p 9:00p 10 SP
4 SU 9:00p10:00p L SLP
CANCEL:ADD/DLT KEY
SELECT 1-8:* ▼ KEY
ENTER :► KEY
END : PROG KEY
P DT START
a —
2 8 10
3 10 8
4 SU 9
STOP CH SPD
OOp 12:00p 125 SLP
OOp
9:00p 10 SP
00p10:00p L SLP
Press
AT
repeatedly to
select the
desired program
number.
Press the
ADD/DLT if you
want to clear the program.
d Press PROG twice to exit this mode
and return to the normal TV screen.
SELECT 1-B:* ▼ I
ENTER :► KEY
END :PROG KEY
L
3 Copying Your Tapes (Dubbing)
Connections you’ll need to make.
• Use this same connection for your video
camera, laser disc player, video , . .
games, etc. Recording (Editing)
Combination VCR
( Video In ) (T
( Audio Out R )
( Audio Out L
Playing
(Source) VCR
Audio In ^
( Video Out ) Audio In L )
1
Insert a pre-recorded tape into
the Playing (source) VCR.
2
Insert a blank tape with record
tab into the Recording (editing)
Combination VCR.
3
Select “LINE” as the input on the Combination VCR.
• See “Selecting the Input Mode” section on page 17.
4
Press PLAY on the VCR.
Then, press PAUSE when the tape reaches the
point at which you want to start copying.
5
Press REC on the Combination VCR, and then
immediately press PAUSE on the remote control.
B Press PAUSE on both units at the same time to
begin copying.
You can edit out unwanted parts of the original recording by
using PAUSE {on the Recording unit) while copying is in progress.
7
Press STOP on both units to stop copying.
Caution:
Unauthorized exchanging and/or copying of copyrighted
recordings may be copyright infringement.
19