Saving shows to videotape – Panasonic PV-HS1000 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Saving Shows to Videotape

For long-term archiving, or if you want to save a show permanently, you can

save shows recorded by the Hard Disk Recorder to videotape. This way, you

reserve more space for the Hard Disk Recorder to record other shows. The
Hard Disk Recorder is not intended to be used as a long-term storage device.

Before you begin...
Make sure your VCR is properly connected to the Hard Disk
Recorder. This is done by connecting cables from the OUTPUT jacks

on the Hard Disk Recorder to the INPUT jacks on your VCR. The
cables you use for this connection depend on the types of input \acks
on your VCR. See page 14 and 15 for more on connecting a VCR to

the Hard Disk Recorder.

[ Insert a rewound videotape and turn on your VC^

2

f

Press REPLAY GUIDE to display^the Replay Guide.^

I • You can also select

“Replay Guide”

from the Main Menu. J

3^

Press

A/W

to select the show you want to save,

then press SELECT.

The popup menu displays.

4

5

Press

A/W

to select “Save to VCR,” then press

SELECT.

Press SELECT with ^

“Continue”

highlighted

to start the on-screen
countdown.

Press the Record
button on your VCR
before the on-screen

countdown reaches 1.

Welcome to P.viasooic SHOWSIOC,,.

REPLAY
GUIDE

3

A / W / < / >

\

buttons

4

3

SELECT

4

5

To delete the show once it’s done recording to

videotape.

a. Press

REPLAY GUIDE

to display the Replay Guide.

b.

Press A/T/^/^ to select
the show that was recorded
to a videotape, then press

SELECT.

C.

Press

A / W

to select

“Delete,”

then press

SELECT,

d. Press A/V to select

“Yes,”

then press

SELECT.

• The show is permanently

removed from the Replay Guide,

freeing up more recording space.

RepiayGuide

Don’t press any buttons on the remote

while the show is being saved to

videotape or the on-screen displays

will be recorded.

Press the RECORD button on your

VCR before the countdown reaches 1

if you want to record the information
about the show. This will show you
what the program is about when you

watch the videotape later.

Some VCRs take longer than others

to begin recording. You may want to

experiment to see when to begin

recording on your VCR.

39

Advertising