Panasonic PV-HS1000 - Manual (Page 43)

Searching for Your
Component’s Code
If your component does not respond to the Hard Disk Recorder remote
after trying all of the codes listed for your brand, or if your brand is
not listed, try searching for your code.
For example, if you try all of the codes for your TV and cannot get the
Hard Disk Recorder remote to operate your TV, follow steps below.
2
3
4
5
* If you are searching for your VCR, or DVD player code,
you may want to use PLAY instead of POWER to search
for your code. When your VCR starts to play, press CODE
SET to lock in your code.
" When your TV turns OFF, press CODE SET ^
to lock in the code for your TV.
• Your Hard Disk Recorder remote is now
programmed to operate your TV.
Red LED
3
CODE SET
6
5
POWER
■VCR/DVD
SAT/CABLE
2 tv
5
4
Number
Buttons
PLAY
' To search for the codes of your other components, repeat
steps 1~6, and substitute the appropriate device button {TV,
SAT/CABLE, or VCR/DVD) for the component.
42