Panasonic OMNIVISION PV-V4611 - Manual (Page 26)

Tape Operation Special VCR Features
Repeat Play
Set to playback a recording over and over.
1 Press ACTION*
to display menu.
RCMOTE WAAMNG XU*
AUTO SHUT-Off <m
СЮШЛАНОиЕ: ENGLISH
VWS OUTPUTCH Л
Press AW
to select REPEAT
PLAY and press ► to
set ON or OFF.
• Play repeats at tape
end or if unrecorded
portion over 30 sec.
is detected.
Press ACTION
to return to normal screen.
Zero Search
To quickly return to a specified tape location.
1 Press DISPLAY during play
to display Counter.
PLAV t2;00AU
Press COUNTER
RESET at desired
position
to reset to “0:00:00"
^ Continue to record, playback, etc.
Press Stop.
Press CM/ZERO
in Stop mode
to start ZERO
SEARCH.
• Unit will go into FF
or REW mode and
stop at the last point
the Counter was set
to 0:00:00.
If a blank portion exists on the
tape, and depending on the position
of the V mark, the V mark display
position may not be accurate.
Tape Position Display Feature
To find out the present tape position.
Tape position cannot be detected for VHS-C
Cassette types and tapes of less than 60
minutes length.
1
Press TAPE POSITION
to detect Tape Position.
(^DETECTING TAPE POSmOwJ
“DETECTING TAPE
POSITION" only
appears the first time
a cassette is inserted
and it takes several
seconds for correct
indication to appear.
The present tape
position indication is
displayed.
Press TAPE POSITION
to return to normal screen.
Remote Warning ON/OFF Feature
If Multi-brand feature is used (page 20), and this
feature is set to on, a warning appears whenever
an invalid key is pressed in TV, DSS, or Cable
mode.
1 Press ACTION
to display menu.
AUTO SHUT-OPF
ЮЮМАииюиЕ: ENGLISH
VCH'S OLTTPUTCH :3
Press AT
to select REMOTE
yyARNING and press ►
to set ON or OFF.
• If "OFF,” remote
warning will not
appear if invalid
key is pressed.
Press ACTION
to return to normal screen.
26
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]