Panasonic OMNIVISION PV-V4611 - Manual (Page 27)

‘Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When “ON," picture is displayed regardless of signal
strength.
1
SELECT/SET
A:PLAY
▼ :STOP
► :FF
4
:REW
ACTION
COUNTER
RESET
TAPE
POSITION
DISPLAY
CM/ZERO
>VCR t
REPEAT PLAY
OfF
REMOTE WARNtNO ON
AUTO SHUT-OFF ON
IDIOMAJLANGUE : ENOUSH
VCR" S OUTPUT CM 3
Press ACTION
to display menu.
Ì VCfl RiOCKI CHANNEL
riïfTËNNAT C able
Press 4^
to select and display
CHANNEL,
press AT
to select WEAK
SIGNAL DISPLAY,
and press ► to set
ON or OFF.
ON; Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
OFF: Screen turns solid blue when signal is weak
or non-existant.
Selecting ON has no effect on connected
equipment with blue back feature.
Press ACTION
to return to normal screen.
VCR Lock Feature
When set to ON, all operations except
for timer record and tape eject are
prohibited. Useful for households with
small children.
VCR LOCK ACTIVATED
VCR LOCK OFF
To turn on,
hold down REC on
the VCR in Stop
mode with no tape
inserted for 7 sec.
(Please ignore the
NO CASSETTE
warning.)
To turn off,
repeat above.
VCR Lock cancels in 24 hours if
clock is set.
1...................... .....
1
1
'---- ' '----- ’
REC
Auto Shut-Off Feature
When set to ON, VCR shuts off if blank tape is
played or no signal is detected for 5 min.
1 Press ACTION
to display menu.
~VCR~I ^LOC i TLCHANI
REPEAT PLAY ;OFF
REMOTE WAHNINQ
iriEÜ
n
Press AT
to select AUTO SHUT­
OFF and press ►
to set ON or OFF.
Press ACTION
to return to normal screen.
27