Audio connections, O' ready checklist, Connecting amplifier (2ch stereo system) – Panasonic PV-D4734S User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
uonneciions ^conimuea;
Audio Connections
O' Ready Checklist
□ Turn down the volume, then turn DECK, as well as other equipment to be connected,
off before proceeding with connection.
□ Do not block ventilation holes of any of the equipment and arrange them so that air can
circulate freely.
□ Read through the instructions before connecting other equipment.
□ Ensure that you observe the color coding when connecting audio and video cables.
■ Connecting Amplifier (2ch stereo system)
DVD/VCRDECK
Speaker
Amplifier
Speaker
'\UDIO OU'I
AIJDI
o
'IN
ci
Enjoying digital audio output from the digital audio output connector
Notes on audio output from the optical digital audio output connector
Disc
Sound recording format
Optical digital audio output from connector
DVD-Video
Dolby Digital
Dolby Digital bitstream (1 - 5.1 ch)
or PCM (48 kHz sampling/16 bit only)*^
Linear PCM
(48/96 kHz 16/20/24 bit)
Linear PCM (2 ch)
(48 kHz sampling/16 bit only)*=
DTS
Bitstream or PCM (48 kHz sampling/16 bit only)’*^
DVD-RAM
Dolby Digital
Dolby Digital bitstream (1 - 5.1 ch)
or PCM (48 kHz sampling/16 bit only)
Linear PCM(48 kHz/16 bit)
Linear PCM (2 ch)
CD
Linear PCM
Linear PCM (44.1 kHz sampling)
MP3
MP3
Linear PCM (It depends on the MP3 file)
*1 The type of audio output from the connector can be selected by the Settings for DVD
Operation. (See p. 53.)
*2 When “LPCM(DVD)” is set to OFF in the DVD Main Menu, only 48 kHz sampling/16 bit is ouput.
When set to ON, sampling of sound quality greater than 48 kHz/16 bit is reduced to 48 kHz/16
bit. (See page 53.)
For your reference:
• Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories
Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel)
sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc.
• Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit,
DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from
the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as from
titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic
Surround Sound Decoders please contact your local dealer.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No’s. 5,451,942,
5,956,674, 5,974,380, 5,978,762, 6,487,535 and other US. and world-wide patents issued and
pending. “DTS” and “DTS 2.0 -r Digital Out” are trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.
14