Audio mode for recording, Press audio (sap/hi-fi), Make a recording – Panasonic PV-D4734S User Manual
Page 27: Audio mode for playback, Start playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
press me von uuuon on me remoLe anu iry me uuiion again.
Audio Mode for Recording
1
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
(Display disappears after 5 seconds.)
Press AUDIO (SAP/Hi-Fi)
repeatedly
to select desired mode.
• Refer to “Receivable Broadcast Types” on p. 26.
• Arrow indicates seiection.
Make a recording.
See p. 21.
Audio Mode for Playback
1
start playback.
See p. 20.
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
Press AUDIO (SAP/Hi-Fi)
repeatedly
to select desired mode.
• Select “HIFI (L/R)” or “HIFI (L)” or “HIFI (R)” to listen to stereo
recordings in stereo sound.
Select “NORMAL” for monaural sound.
HIFI :L/F
HIFI :L
HIFI :R
NORMAL
Arrow
indicates
selection.
Display disappears after 5 seconds.
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14.)
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
Hi-Fi and normal audio playback volume level may differ.
27