Panasonic OMNIVISION PV-8402 - Manual (Page 30)

Д| Special VCR Features
^Important; If the remote control POWER, ACTION, PROG, CHA/V , INDEX, or ADD/DLT button does not work
when pressed, press the VCR button on the remote and try the button again.
[^c Check list before you begin.
□ All connections are made. (See pages 6~9.)
□ VCR is plugged in.
O TV is turned on and set to the VCR channel (CH 3 or 4).
REC/TIME
2
3
b
c
VCR Lock Feature
When activated, this feature prohibits all operations except
for timer recording and tape eject. This feature be
used to keep young chiidren from operating the VCR.
vcn
LOCK ACTIVATED
VCR LOCK OFF
Hold down REC/TIME on
the VCR without a cassette
inserted for 7 seconds
while in Stop mode.
To Cancel the VCR
Lock feature,
with or without a cassette
inserted, hold down
REC/TIME on the VCR
for 7 seconds again while
in Stop mode.
VCR Lock mode is cancelled automatically after 24
hours as long as the clock is set. 30
Blue Back ON/OFF Feature
You may choose whether or not you want the VCR to display a solid
blue screen when the broadcast signal is very weak or nonexistent.
1
Press ACTION* to display
the menu.
Press
AT
to select “SET
UP VCR,” and then
press ^ to display the
“SET UP VCR” screen.
Press
AT
to select
“NOISY CH BLUE BACK,"
and then press ^ to
select “ON” or “OFF.”
------------------ MENU --------------------
SET CLOCK
SET UP CHANNEL
IDlOMA/LANGUE:ENGL I SH
SELECT:* ▼ KEY
SET ;► KEY
END ;ACT I ON KEY
----------- SET UP VCR -...................
REPEAT PLAY : ON
BEEPER - ON
; ON NOISY CH BLUE BACK
SELECT:* ▼ KEY
SET :► KEY
END
: ACT I ON KEY
When “ON” is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When “OFP is selected, the picture
is displayed regardless of the signal condition.
The picture can not always be seen clearly when
“OFP is selected.
Press ACTION twice to exit.
NOTE
When the VCR is connected to a Combination
VCR which has a Blue Back feature, even if
the VCR Blue Back is set to “OFP on the VCR,
the screen will go to blue back.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound
each time an invalid entry or incomplete operation is made.
a Press ACTION to
display the menu.
Press
AT
to select
“SET UP VCR,” and then
press ^ to display the
“SET UP VCR" screen.
Press
AT
to select
“BEEPER,” and then
press ► to select
“ON” or “OFF.”
-.................... MENU.........................
нзизеваз
SET CLOCK
SET UP CHANNEL
IDI ОМА/LANGUE; ENGL I SH
SELECT:* ▼ KEY
SET :► KEY
END :ACT ION KEY
------------ SET UP VCR -----------------
REP^T PLAY : ON
moi *I y '{: h blue back I m
SELECT;* T KEY
SET
KEY
END ;ACTI0N KEY
Press ACTION twice to
exit this screen.