Adjusting the deep bass (xbs), Adjusting the graphic equalizer control, Listening through headphones (not included) – Panasonic RX-DT600 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The OPERATION/BATT indicator lights when the power is turned on.
To listen to the radio
’
COD* f
. FUDI0*|
Lin»'
c:
Set SELECTOR to “RADIO”.
To listen to CDs
Set SELECTOR to “
CHD”-
To listen to tapes
'
t
Btr^
RADtO*
Lin»'
C
Set
SELECTOR
to
“TAPE/
M»ia» ”,
The power is supplied and the
OPERATION/BATT indicator lights only
while the tape is travelling.
Turn VOLUME to adjust the
volume to the desired level.
Turn it ciockwise to turn up the volume.
Turn it counter-clockwise to turn down
the volume.
Adjusting the deep bass (XBS)
XBS
LEVEL
Turn XBS LEVEL to adjust the
deep bass to the desired level.
Turn it clockwise to increase the deep
bass.
Turn it counter-clockwise to reduce the
deep bass.
Adjusting the graphic equalizer control
11^ a.wtE
Adjust the graphic equalizer controls to
j =„ desired settings.
W w
QRAPHIC EQUALIZER
Turning the power off:
COD*
I
MDlOe I
TAPE/.
Set
SELECTOR
to
“TAPE/
€8Ha”.
Press STOP/EJECT if a tape is travelling.
The OPERATION/BATT indicator goes
off.
Listening through headphones
(not included)
(|)'
In
Turn down the volume and
connect the headphones to
the PHONES jack.
Plug type: Stereo mini
Note:
Avoid listening for prolonged periods of
time to prevent hearing damage.