O^àrging the battery – Panasonic DMC-LC20T EN User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O^àrging the Battery
1
insert batteries into the charger.
2
Connect the AC Mains Lead to the
charger and AC mains socket.
® The AC Mains Lead does not fit
entirely into the socket. A gap wil!
remain as shown ©.
® The charger lamp ® lights and
charge starts.
3
Charge is completed when the
charge lamp is no longer
illuminated.
Environment/charge error
® Charge in a place with a surrounding
temperature of 0 - 40 °C (also
temperature of the battery).
® When charging starts, the charge lamp
lights.
if after charging starts the charge lamp
blinks, it indicates a charge error.
In this case, remove the charger from the
electrical outlet, take out batteries, check
whether the surrounding temperature or
the batteries are too hot or cold, and
charge again. An error cannot be
cancelled by turning the power off/on. if
after charging again the charge lamp still
blinks, consult your nearest servicentre.
• Use Panasonic AA Ni-MH (nickel-metal
hydride) Batteries.
11