Panasonic DMC-LC20T EN User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
♦ When power saving time is set, if you do not operate the camera, it is
automaticaily turned off depending on the set time (approx. 2 / 5 / 1 0
minutes). To operate the camera again, turn the power switch first to
[STANDBY] and then to [OPERATE]. (P59)
• The brightness of the LCD monitor may differ from that of the recorded
pictures, in particular, when taking pictures in dark places with a long
exposure time, darkness appears on the LCD Monitor, but recorded
pictures are bright.
Parallax compensation mark ®
Moving the zoom lever towards T and
taking pictures at a distance of 70 cm -1 m
from the subject, match the top of the
subject with the parallax compensation
mark, so that it does not get cut off. When
an accurate framing is necessary, use the
LCD monitor.
25