To erase the second area code, Storing a second area code – Panasonic KX-TC1731B User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
storing a Second Area Code
You can program another local area code. This area code does not require
a “1” before it when dialing. After storing this area code, the display will
show the 10 digits (3-digit area code plus 7-digit phone number) after a call
is received from that area code. Calls will be recorded in the Caller List
without “1”. You cannot store a second area code unless your area code is
stored first (p. 18).
The TALK indicator light must be off before programming.
•j Press I PROGRAM!.
« The TALK indicator flashes.
p Press SEARCH 0
(Next
key) repeatedly
^ until
“2nd area code
?” is displayed.
0 Press SEARCH 0
(Yes
key).
• The current setting is displayed.
If no second area code has been
programmed, “—” will be displayed.
« If 3 beeps sound, your area code is not
stored. Store the code first (p. 18), then
start from step 1.
^ Enter a second area code.
« If you enter a wrong number, press
[CLEAR], and enter the correct number.
Press I PROGRAM I
(Save
key).
« A beep sounds.
• The handset will return to the stand-by
mode.
Save AUTO# ?
v=Next A=Yes
2nd area code ?
v=Next A=Yes
2nd area code
Enter area code
2nd area code
:124
PROGRAM=Save
2nd area code
: 124
• To cancel during programming, press [EXITl. Start again from step 1.
To erase the second area code
Press [PROGRAM] ^ SEARCH 0
(Next
key) twice
^ SEARCH 0
(Yes
key) ^ (CLEARI
^
[PROGRAM]
(Save
key).
19