To erase a stored number, Dialing a stored number – Panasonic KX-TC1731B User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3334444
Save in AUTO 1
g Press a memory station number ({o) to [
9
)).
o A beep sounds.
o The handset will return to the stand-by
mode.
® To store other numbers, repeat steps 1 through 5.
o To cancel during programming, press I PROGRAM I or iwn. Restart from
step 1.
® If a pause is required for dialing, press IW
ediau
PAUSE] where needed.
Pressing IREDIAUPAUSEI counts as one digit {p. 43).
To erase a stored number
Save AUTO# ?
v=Next A=Yes
Enter phone no.
AUTO=Clear
Select 0-9 to
clear in AUTO
-j Press I PROGRAM I.
o The TALK indicator flashes.
2 Press SEARCH 0
(Yes
key).
2 Press [CLEAR].
Press [AUTOl.
C Press the memory station number
^
((g) to (D) for the phone number to be
erased.
Dialing a Stored Number
-j Press [TALK).
2 Press fAUTOl.
0 Press the memory station number ({o) to ®).
o The stored number is dialed.
o If your line has rotary or pulse service, any access numbers stored after
pressing I TON El will not be dialed.
n
Clear in AUTO 1
33