Tv operation, X check list before you begin, Using the 100 key – Panasonic pvm1348 User Manual

Page 11: Rapid tune, Audio mute, Phones, Self-demo mode, Nite/game mode feature

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TV Operation

|\X Check list before you begin.

n All connections are made (see page 5).

□ Your Combination VCR is plugged in.

1

Press POWER to turn the Combination VCR on.

2

Select a channel using CH AT or the NUMBERED keys.

3

Press VOL'^^ to adjust the volume level.

Model PV-M2038 unit is shown here.

Using the 100 key

When selecting CABLE channels 100 to 125 with the NUMBERED

keys, first press the 100 key, and then enter the remaining two digits.

For example, for channel 125: Press NUMBERED keys 100-2-5.

Rapid Tune

Press R-TUNE to display the last channel you were watching.

• When selecting channels with CH

at

,

the channels must be displayed for at
least 4 seconds in order for the Combination
VCR to recognize them as a new selection.

CH08 <

» CH10

Previous

channel

Present

channel

Audio Mute

Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.

Phones

Connect an earphone (not supplied) or headphones (not supplied) to
the Phones Jack.

SELF-DEMO Mode

In Power ON condition, hold down PLAY/REPEAT on the Combination

VCR, with no tape inserted, for 5 seconds. The demo screen appears.

To cancel: Repeat the above operation. The demo screen disappears.

NITE/GAME Mode Feature

This feature adjusts the color and picture intensity levels so the screen is
easier on the eyes when watching a video or TV at night, or when playing

video games.

Note: This Combination VCR contains no video game software.

Press NITE/GAME repeatedly to select

the desired mode.

• “NITE” or “GAME" is displayed for 4 seconds.

• Each press of NITE/GAME will change the mode

as shown below right.

• NITE mode may be selected when watching

TV, playing a tape, or while in FM mode. GAME

• mode may only be selected when watching TV

and playing video games.

x—

To Cancel the NITE or GAME mode,

(^o display)

press NITE/GAME until the normal screen appears.

• The previous color and picture settings will be restored.

NITE mode is cancelled when:

• the power is turned Off • a power failure occurs

GAME mode is cancelled when:
• the power is turned Off

• play mode is entered

• channel is changed

• a power failure occurs

• input signal is changed • FM mode is selected

11

Advertising