Panasonic pvm1348 - Manual (Page 23)

Timer recordings must be recorded
back to back in order for them to be
placed on the Program Index list. If a
timer recording is followed by a
function, such as REW or PLAY the
data Is lost.
Model PV-M2038 unit is shown here.
STOP/ REWIND FAST FORWARD
EJECT
C C
Program Index Search
(For timer recordings only.)
This feature allows you to choose a timer recorded program from a
Program Index list, and then start a search for that program.
• Once a tape Is ejected or normal recording is started, all program
index data is erased.
1
Press INDEX in Playback or Stop
mode to display the INDEX screen.
2
Press AV to select “PROGRAM
INDEX SEARCH,” and then press
► to display the PROGRAM
INDEX screen.
3
Press AT to select the desired
recorded program, and then
press ► to start the fonward or
rewind search.
• When the designated program is
reached, the Combination VCR
automatically goes into Playback mode.
INDEX SEARCH
ROGRAM INDEX SEARCH
PROGRAM INDEX
START CATEGOR'
[Bi
1/ 4 12:30P MOVIE NBC
1/4 8;OOP COMEDY CBC
1/ 7 3:00P MUSIC NBC
SELECT:* ▼ KEY
SET :► KEY
END :INDEX KEY
Index Scan
(For normal and/or timer recordings.)
This feature allows you to scan (forward or reverse) each recording for 10
seconds in Playback mode.
3 Press INDEX in Playback or Stop
mode to display the INDEX screen.
• This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step c.
b Press AT to select “INDEX
SEARCH,” and then press
► to display the INDEX screen.
C
Press REW or FF to begin the scan.
• As each index mark is reached, a short
playback wilt be performed after which
FF or REW resumes.
d Press PLAY to cancel the scan
and begin playback.
• You may also press STOP to stop the tape.
Start here
PROGRAM INDEX SEARCH
SELECT:* ▼ KEY
SET :► KEY
END :INDEX KEY
Current I Program
(
PressFF i
I STOP
t Indexed Point
■w Play (for about 10 seconds)
— Fast Forward or Rewind
STOP I
23