Panasonic PV-GS80 - Manual (Page 27)

Record mode
• Playback of the image on other digital video
equipment recorded in the LP mode.
• Frame-by-frame playback.
Recording on a tape
Remove the lens cap. {-/.!-)
(When the Camcorder is turned on with the
lens cap fitted, the automatic white balance
adjustment may not function properly. Please
turn the Camcorder on after removing the lens
cap.)
When this unit is purchased, the aspect ratio is
set to [16;9] for recording images compatible with
a wide-screen TV. To make this unit compatible
with regular TVs (4:3), change the [ASPECT]
setting before recording the images (-;!.■?-) or
change the [TV ASPECT] setting when watching
them on the connected TV (-4/-).
• Set to Tape Recording Mode.
^ll
A
n
V ---------------'
I
1 Press the recording start/stop button to
start recording.
2 Press the recording start/stop button again
to pause recording.
On-screen display in the tape
recording mode
1 )
2) Remaining tape indication
3) Still picture size
4) Card indication (-.«-)
5) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
5) Quality of still pictures
■ Concerning the remaining tape time
indication on the screen
• The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
• During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
• In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
• For the recording time on a tape, refer to
-is-.
• Carry out a recording check (-2S-) to verity that
the image is recorded properly.
• In order to find the unrecorded section, carry out
the blank search i- 28-) .
27
LSQT1121