Talkswitch CT.TS005.002606 - Manual (Page 11)

1 0 V O I P N E T W O R K C O N F I G U R A T I O N G U I D E
3. Map the following ports (Type: UDP) to the TalkSwitch units. These RTP
ports forward voice traffic to the TalkSwitch system by default.
If required, you can map different ports. In this case enter the first port in
the Starting RTP port box of the VoIP Settings window.
4. If you are setting up external IP extensions, map port 69 (Type: UDP) to
the TalkSwitch unit acting as local proxy. Port 69 allows the TalkSwitch
system to configure external IP extensions.
5. If you are setting up TalkSwitch IP phones as external IP extensions, map
port 8484 (Type: TCP) to the TalkSwitch unit acting as local proxy. Port
8484 allows the TalkSwitch system to configure TalkSwitch IP phones as
external IP extensions.
6. Map port 9393 (Type: TCP) to the TalkSwitch unit acting as local proxy. Port
9393 allows remote configuration of the TalkSwitch system.
7. If available, enable Quality of Service (QoS) to give voice traffic priority
over data.
8. Save the configuration to the router.
VoIP Lines/
Unit Unit 1 Unit 2 Unit 3 Unit 4
4 6000–6006 6010–6016 6020–6026 6030–6036
8 6100–6114 6200–6214 6300–6314 6400–6414